Pocket bikes, also known as mini motors are miniature-sized motorcycles, fueled with either gas or oil and powered with gas-burning engines. The concept of motorbikes had begun in Japan, a country known for miniaturizing full-scale products.

Previously pocket bikes were used only on closed racetracks, private roads and on roads that were not under public traffic laws, so that no big car or truck can run into your minute sized pocket bikes. But these you will often find pocket bikes zinging in and out of the parking lots, up and down the residential streets and occasionally onto the side of the cars.

The pocket bikes usually move at a top speed of 35 mph, but often the speed can be raised further. Another interesting feature of these pocket bikes are their duplicate imitation of normal-sized street motorcycles. The pocket bikes are equipped with handlebars, twist-grip throttles, and chain drives, electronic ignition and disk brakes.

The pocket bikes are not at all safe for the highways or high traffic zone areas. If you are driving a small sports car and someone is driving a mini pocket bike behind you, you will fail to see him or the pocket bike. So it becomes really dangerous to move in a traffic-crowded area, as the rider can be easily run-down by the driver of the bigger truck. The pocket bikes are specially designed to travel only on the racetracks.

There are some safety measures that should be followed while one is driving these pocket bikes. The person driving the bike should be an ace in driving and he should always carry his helmet and pads. If by chance if your kid is riding the pocket bike, then make sure that he/she does not go out of the backyard or the driveway.

The pocket bikes follow hi-tech technology so the snazziest models cost even more than thousands. The smaller models, however, cost around $200 to $800. They basically come from Japan and China and are specially famous amongst the teenagers and people in their early youths. These bikes weigh almost 50 pounds, stand about a foot and half high and can be carried stacked in a corner of the trunk of the car. They have really tiny engines with 47 cc to 49cc displacement, less than 1/20th the size of the bigger motorcycles.

Try out the pocket bikes. If you want something thrilling, something exciting, something enticing to bring a difference to your monotonous days, then pocket bikes are the best alternatives for you.

Any racer is likely to tell you that there is performance, and then there is Performance. Optimal performance is the end goal, especially from super pocket bikes. You want the best possible performance out of super pocket bikes, and doing so is not all that difficult. There are a few basic tips that can help to ensure your bike stays in top notch shape.

One of the most basic rules to keep your super pocket bike running smoothly is the same rule that you need to keep any vehicle running smoothly, from mini bike to a car or van: choose your gas carefully. For super pocket bikes, most pros will tell you not to use racing fuel. Not only does it not help, it might cause problems that other fuels would not. High octane unleaded gasoline works best. As with any gas station, look at the condition of the pumps and ground. If they look bad and there is standing water around where the gas in put into the tank, try the next one down the road. Make sure to mix the oil right, too. The mixtures are fairly easy to figure out, and do not use the same oil as cars. It is not designed for pocket bikes. Buy motorcycle oil.

Break the super pocket bike in right. This mainly involves using common sense. Don't run your bike at the maximum RPM's during the break in period. That puts undue stress on the motor. On average it will take about four tanks of gasoline, five to be safe, to break your super pocket bike in. During this period, don't push the bike too hard - baby it a bit. Slow and steady quite literally will lead to winning the race. Going along with treating your bike right, don't run it cold. Allow your super pocket bike to warm up for about five minutes after starting it. This allows the motor and the fluids to heat up to their optimal running temperatures. You would never just start your car when its winter outside and take off, so don't so the same with your bike. It's not meant to run cold!

Finally, get to know your super pocket bike. Learn what is normal, and what isn't. When it isn't running normally, or if anything at all sounds different than usual, turn it off and find out what the problem is. Make all repairs as soon as possible, and park the bike until the repairs are made. Caution will save you a lot of money in the long run. Follow these tips, and you will be able to enjoy a super pocket bike that lives up to every ounce of its potential.

Motorcycle riders often get an unjustified reputation as being reckless, risk takers, and that they generally disobey traffic laws. This perception is unfounded and there are many statistics that back up the fact that most motorcycle accidents are not the fault of the motorcycle rider, but that of another driver.

A major study conducted by the University of Southern California (USC) found that approximately three-fourths of motorcycle accidents involved a collision with another vehicle, usually a passenger automobile. It was also found that in the multiple vehicle accidents, the driver of the other vehicle violated the motorcycle right-of-way and caused the accident in two-thirds of those accidents. Further the study by USC found that the failure of motorists to detect and recognize motorcycles in traffic is the predominating cause of motorcycle accidents. The driver of the other vehicle involved in collision with the motorcycle did not see the motorcycle before the collision, or did not see the motorcycle until too late to avoid the collision.

These findings go to show that the motorcycle rider has unjustly received a bad reputation from the general public as well as from insurance companies that cover motorcycle riders. Motorcycles are inherently prone to accidents caused by other drivers because of their small size. Motorcycles easily fit into the blind spot of typical passenger automobiles. The truth is that most motorcycle riders are very good drivers and keep an eye out for motorists who do not see them. This awareness of other drivers however does not prevent all accidents.

When accidents such as these happen, the insurance company of the driver who is at fault will go to great lengths to keep from giving the motorcycle rider the money he or she deserves. Insurance companies will frequently rush the victim to make a quick settlement as a way to save money. Most people in the general public are not insurance experts and do not know if they are getting a bad deal from the insurance company or not. When a check is stuck in front of them it can be quite tempting to sign.

Taking the insurance companies first offer is usually a mistake. Other times the insurance company of the other driver will try to not pay at all for the accident and resulting injuries. They often try to make it appear that the motorcycle rider was at fault in the accident. It is not hard to convince a jury of this since motorcycle riders have this unjust reputation of being less than careful.

This is why it is critically important to have a qualified and competent lawyer on your side if you find yourself the victim of a motorcycle accident. A qualified lawyer will help make sure that you get the settlement that you deserve; a settlement that will cover your medical bills as well as paying for the damage to your motorcycle. Not having a lawyer to stand up for you will cost you more than just money, it will also cause you a great deal of headaches and heartache. Trying to fight an insurance company on your own, while at the same time dealing with physical injuries can be an overwhelming task.

A qualified lawyer is the only one who will be on your side in case of an accident. A lawyer works for you and only you. The insurance company works for their shareholders and will try very hard to keep from getting you the money that you deserve.

The latest craze worldwide is purchasing and racing Pocket Bikes. However, this can be very dangerous to the inexperienced rider. These bikes are not toys and should never be underestimated. The bikes that are more powerful and expensive are strictly built for experienced adult riders, not children looking for a joyride. These bikes are built sleek and fast for racing. They have power of 9.5 hp or 12+ hp -these models are definitely suggested for professional racers only. Due the incredible power to weight ratio, if you have no previous experience with these bikes, take safety precautions and educate yourself about their operation before riding.

As for places to race these bikes, there are many options and locations from which to choose. You could choose to become a member of a bike league. These leagues hold races in various locations such as speedways, go-kart tracks, or closed parking lots. The leagues can also assist you in finding other safe and legal places to ride outside of race time. If for some reason you are unable to find a league in your immediate region, you may look inside your local yellow pages or on the Internet for further assistance. Here are a few tips that may help you in case you are still having trouble locating assistance or a league: Find a clear open area that allows for pocket bikes at high speeds, ensure there are no obstacles or obstructions that could result in injury, and also be sure to steer clear of public roads and pedestrian-heavy areas.

Be sure to obtain copies of any laws and regulations you will need to observe in the area you plan on racing in. You should be able to locate or obtain these from the local library or law enforcement offices in your area.

When looking to buy a pocket bike (miniature motorcycle) be sure to do your research. You need to find reliable sales professionals, dealers, or Internet connections to make this purchase. There are many 'knock-offs' or imitations out there and to purchase them would be a waste of your money and time. The parts for these imitations are not typically found and in the rare event that you can find them they will be extremely costly and are typically not guaranteed.

To assist you in making the best buy, talk to others that have already have a pocket bike such as a trusted friend or co-worker, your local pocket bike league, local dealers, etc. You can use the Internet to assist in you in your research as well. This will allow you a more time efficient method of comparing prices as well as obtaining information for various bikes. You will be able to compare the price of the actual bike as well as any amenities offered, allowing you to see which has the best offer.

Also note that when you buy a pocket bike, the laws vary from state to state and country to country. Speak with your local law enforcement agencies and local pocket bike league so that you understand all local rules, regulations, and laws. You are making an investment and it would be a waste of money as well as your time to lose such an extraordinary machine because you failed to get all the correct information.

Once you have done your research and have decided to make your purchase, make sure of any safety equipment and/or gear you made need. You are making this purchase to have fun and fulfill some dreams, so your safety should be a priority so that you may continue to do so.

And now that you have done everything you need to make your purchase wisely and ensure your laws and safety, go out there and have fun. This is why you why you want to buy your pocket bike to begin with.

How are Motorcycle Batteries Rated?

The amp/hour (AH) capacity is the basis for rating motorcycle batteries. For example, a 12AH battery can produce one amp of current flow for 12 hours, or two amps for six hours. In order to calculate the amount of time needed to use up a fully charged motorcycle battery by turning the lights on, we have to take power in watts, and divide it by voltage, which gives us the current draw in Amps. Therefore, a 72 watts beam and tail together, divided by 12 volts equals a 6-amp draw. So in 2 hours, the 12AH battery is dead.

Checking Motorcycle Battery:

If you decide to check if your new motorcycle battery is done correctly, follow this actual factory-recommended service procedure.

If the battery is not a maintenance-free type which doesn't have a vent tube, unwrap the battery, unkink the vent tube and snip about a half-inch off the end. Fill it with electrolyte midway (between the high and low level markings on the case) and leave it undisturbed for one or two hours. Remember, the battery will still be at only 65% of full charge at this point. Add electrolyte again if required.

If your battery is a refillable lead-antimony type, it should be charged at one-third of its rated capacity in amp/hours for four to five hours to get it to full charge. Maintenance-free type battery should be charged with a constant-current charger that can drive the charge with as much as 16.9 volts. This should be closely supervised so as not to exceed full charge.

Next, recheck the electrolyte level and add water if required. Let the battery cool so the case contracts enough to fit into its typically tight little holder. Run the new breather tube, if the battery comes along with one, carefully through the original factory routing.

Things to Remember when Charging the Battery:

1.First of all, it is important to remember that Red is positive and Black is negative in order to avoid any accidents such as short-circuits and nasty shocks.

2.The charger should be compatible with the motorcycle battery, and give a greater output than the battery voltage but not too high.

3.Make sure the connections are clean and the electrolyte is at the upper level, and don’t fill the cells up to the very top of the battery.

4.You can either use an optimizer on the battery which can effectively switch off the battery when it’s charged and prevents overheating, or disconnect it manually.

5.It is recommended to put your battery on charge every two or three weeks.

6.An upper and lower level battery should have all the cells on the upper level, not over and never under the lower level.

7.For topping off the low cells, use only distilled water.

8.The minimum charge for a new batter should be at least for 8 hours.

9.If you have a dry battery, fill the cells slowly and leave the battery for around half an hour.

Buying a motorcycle is not that different from buying a car. Prospective buyers need to first check the models that are available in the market and then select the one that is most appropriate to their needs and of course to their budget. But focusing too much on the features can actually make one forget to buy one thing that is really essential when purchasing a motorcycle— the helmet.

Motorcycle helmets are so important and vital to one’s safety that state laws have actually required people to wear them while riding the bike. There are many types to choose from. But whatever the designs or the materials, the person should check the helmet for safety and comfort before buying it and cruising down the highway on the motorbike.

People will notice that most of the headgears sold come in bright colors such as white, red, yellow and orange. The reason for this is to warn other drivers, who are yards away. Bright colors are more visible especially at night.

Some people, however, feel that bright colors are not enough for the safety of the biker. The number of accidents has actually gone up by 12 percent compared to last year’s in a report given by the Bicycle Helmet Safety Institute. The only way to prevent the numbers from further going up is to provide added protection, perhaps in terms of blinking lights, spray paints and even glittering stickers.

Most people put reflective stickers on the side and back of the helmet. Others spray paint this with a certain design. Since the cost for both is almost the same, the person can try having both after choosing the right graphics.

Lightning bolt, reflective eagle, checker flag and halo are just some of the hundreds of graphics that can be placed on the helmet. These are usually one or three inches long going from one side of the headgear to the next. The individual will not have a hard time looking for an auto detailing shop that offer these services. Some can be found around the neighborhood while others over the Internet.

The individual should however look at the catalog before making any decision. The price for the graphics may go from $4 to $8 a piece. This will depend on how complex the design is especially if it is custom-made. It is advisable then to compare the prices offered because it is possible that one dealer will give this at a more affordable rate with an added freebie.

When a graphic design is chosen, the person will have to leave the helmet with the manufacturer. Some even ship it back. The helmets will then be returned in a few days.

How do you make your Harley Davidson look and feel like an extension of yourself!

Do you think maybe it's time to do a little customizing for that old girl of yours? Ask yourself this first.

Why do we customize and add accessories to our Harley?

Well, for me it's simple!

We want to stand out above all else! The last thing we want is to look like every Tom, Dick, and Harry out there on the road!

You may have different reasons. You may want to add an Accessory to your bike because it fits with you and your taste.

There is an element of being practical as well. If you install a nice chrome luggage rack on your back fender, or a detachable windshield, it not only looks good but it also serves a purpose. How else would you carry your tent and keep bugs out of your teeth?

Not everyone has the same taste in customizing. Thank God for that, or it sure would be boring taking a walk down on main street in Sturgis South Dakota during the 1st week of August.

Some people go overboard on customizing their bike. Overboard for someone may be a masterpiece for someone else. It all depends on who you are and what you're about.

How do you pick out a Harley Davidson Accessory or decide on customizing?

It's a hard question to answer.

I would suggest that you decide on what you want out of your bike. Sit back and have a look at yourself. What kind of biker are you anyway?

Are you a speed demon that likes to lay rubber on the road every now and then. Do you get a kick out of doing a little showing off at bike rallies to friends and family? Do you like to participate in show and shine contests?

If you are this person you may want to look at getting your engine rebuilt for increased horsepower. You can't go wrong with a lot of Harley chrome either. Just when you think you have had enough of chrome, you find some more in that catalog.

Don't worry, there is a chrome Harley Davidson motorcycle built to date.

Your style may be a little more subdued. Your main motorcycling purpose in life may be ride the road and not waste time with anything else. You would have to agree, most people still want to look good riding a Harley.

If you are this person you may only want one or two Accessories. A nice luggage bag that slips over that backrest on your bike looks good when you are on a long trip and it serves a purpose.

Every Harley Davidson owner at some time or another has thought about adding an accessory to his or her motorcycle. You rarely see a stock Harley Davidson!

For every motorcycle enthusiast, it is indeed very taxing to maintain bikes as good as new – its engine running and all its other parts functioning. We know for a fact that it’s not only for the sake of transportation but also for a little satisfaction of our vanity – seeing everyone admire us, atop an excellent piece of machine. Like any road going vehicle, a motorcycle's performance is based on the smooth running of thousands of parts, large and small. It is a nuisance indeed to find some faulty parts on a vehicle and prevent owners from enjoying its full use.

Broken parts on a motorcycle can spell tragedy for its driver and extensive damage to the machine. In a motorcycle, the safety and security provided by a four wheel vehicle on each corner doesn't exist as such, when its rear wheel locks up at 70 mph it could skid out of control and throw its rider. What’s more heartbreaking is to know that the cause of the accident is because of a broken part.

The best solution is to always have a replacement part handy in order to have extra parts for those which have been damaged or lost. Having ample budget for this would, however run risks for your pocket. If you do not have sufficient budget to afford the high costs of brand new replacement parts but afraid of scratching around for used motorcycle parts from questionable origins and warranty, don’t fret. There’s still a way for you to save money by buying used motorcycle parts and prevent you from living your worst nightmare.

Yes, indeed! Buying used motorcycle parts are a great way for you to save money and keep your bike going splendidly. There are just some pointers or guidelines for you to remember once you have decided that your budget leaves you little choice between brand new and used motorcycle parts. By following several general guidelines, you could still acquire used motorcycle parts that are in tip top shape, good condition and will not be the cause of your bike getting torn apart.

First of all, when scouting for used motorcycle parts, especially online, make a point to double – check, there are things to look out for, consider and avoid. Don’t ever miss out on crucial details, like, how old can the used part be? How compatible will it be to your bike’s model and make? Next, it is understandable to be skeptical, after all, the World Wide Web is full of BS and scams. You have to be careful to avoid those who make stupid claims that expect you to believe them. It is but your right to verify and countercheck the validity of everything that they are offering you and once you have placed an order, as much as possible, give certain conditions for your purchase. Something that may go like, they will have to show you if the purchased part functions upon getting secured on your bike. You could also inquire for warranty periods.

There are ways to save your money and still get above-average used motorcycle parts. Just be wise enough once you decide to be practical and economical.

Motorcycles are becoming more popular because of its convenience and relatively inexpensive cost compared to automobiles. They are capable of the same speeds as cars and can also be licensed for use on public highways.

Owners and drivers of motorcycles opt for these motorized, two-wheeled vehicles as transportation because aside from it being an inexpensive alternative to cars, they can be easily maneuvered and they deliver higher fuel economy. In addition, they take less space for parking. No wonder a lot of Asian countries have more motorcycles than cars.

And for drivers who love speed, motorcycles are great vehicles because they can accelerate more quickly than an automobile. Nevertheless, motorcycles are not for everybody. Riding and controlling this vehicle requires skill and extra caution especially during difficult maneuverings on wet or slick surfaces.

But when you do get the urge to ride a motorcycle, you would want to learn a lot of information on the vehicle, like "Where do I start?"; "How do I start my motorcycle?"; "Do I need to shift gears?" "If so, how do I do it?" And most of all, any beginner would want to know first the makings and basic parts of a motorcycle and how they work.

One author wrote that to give steps on how to start a motorcycle on a hill involves a tremendous number of motorcycle parts. And it doesn't matter if its aftermarket motorcycle parts or OEM, once a new rider begins to learn to ride it, he or she must also be able to identify which part is which, or how to operate the basic procedures for riding a motorcycle.

One of the most important and popular part of a motorcycle is the muffler. Other than the tires, the body, the most well known part I believe is the muffler. The motorcycle muffler includes all pipes and baffles needed to reduce, if not quiet, the exhaust noise. It is also used to match with the carburetor jetting. Most often than not, factory mufflers are changed to aftermarket pipes to tailor to the specifications of the user according to sound and performance.

However, not all motorcycles have the same parts in the same places. Each motorcycle, whether they have aftermarket motorcycle parts or OEM, has its own names for its parts and even the way that the parts are interconnected may be different. It's up to you, the rider, to identify these parts according to the model and brand of the motorcycle you're going to use.

Granny's Mettle is a 30-something, professional web content writer. She has created various web content on a diverse range of topics, which includes digital printing topics, medical news, as well as legal issues. Her articles are composed of reviews, suggestions, tips and more for the printing and designing industry.

Her thoughts on writing: "Writing gives me pleasure… pleasure and excitement that you have created something to share with others. And with the wide world of the Internet, it gives me great satisfaction that my articles reach more people in the quickest time you could imagine."

To really understand the women and her ride, one needs to go back in history to explore the courageous women who defied the norm and road their horses in the freedom of the wind. Who could forget Joan of Arc or Annie Oakley. Two completely different women who followed their own council and fought for their right to ride in a man’s world. Or the women warlords who fought while on horseback and brandished their swords with the best of them. (and yes, women really did that) What man could resist such a women?

Women’s love affair with the motorcycle began with the bicycle back in the 1800’s. They became hugely popular with women. Susan B. Anthony once said, “A bicycle has done more for the emancipation of women more than any other thing in this world”.

When the motorized bicycle was developed in the early 1900’s, it opened up a whole new realm of adventure for the high-spirited woman of the day. Many women took to the open road not on horseback, but on the iron horse. Adventurous women enjoyed many long distance rides. Some were skilled enough to do stunt riding. No mean feat, especially on the earlier bikes.

The ride for men and women are uniquely different. A man on his ride is master of the iron muscle and his testosterone kicks in while he uses his arms and upper body to control the beast. He is lord and master of his ride. Women take a more subtle approach. They use their lower body and their curves to hug the open road. It’s a sensual bond between the bike and the woman. She is also master of the ride but she controls it with more passion and finesse.

There is something about seeing a woman on a motorcycle that makes you take notice. You can see the iron muscle being controlled with femininity. It’s the combination of power and aesthetics that make it an irresistible combination.

There is nothing like the open road for both men and women. To experience the freedom and the wind, the sites you see and people you meet along the way that fuel the spirit and feed the soul. This experience is something no one can take from you.

Pocket bikes are miniature motorcycles -- powered, for the most part, by oil- and gas-burning engines similar to those used in chain saws, weed whackers or other small motorized tools -- and they look just like the real thing.

The snazziest models cost thousands and are made in Italy, but the ones that are selling by the container load run from $200 to $500. They come from China, among other places, and are getting snapped up by eager teenagers and, in some cases, not-so-teenagers.

At Broadtek LLC, a South San Francisco firm that imports them, the cardboard cartons containing the small bikes are stacked to the ceiling of a tall warehouse and are quickly going out the door to eager customers.

In Walnut Creek, Eric Rahin, owner of Sonic Scooterz, says he's selling them in droves -- "from college students to people in their late 50s. It's basically a toy to have some fun with."

Manufacturers say the bikes are supposed to be used only on closed race tracks, private roads or any other place where there are no public traffic laws and, more important, no big cars or trucks to run into you. Many buyers follow that advice.

But now you see some of these new pocket bikes zinging in and out of parking lots, up and down residential streets and, occasionally into the side of a car. And therein lies the rub.

"It's very difficult for a driver (of a car) to see one on those bikes, because of their low height," said San Francisco police Lt. Kitt Crenshaw. "We've had several accidents in the last few weeks, and people went to the hospital."

The pocket bikes have a top speed of about 35 mph, but can be souped up to go faster. They evolved from tiny but highly sophisticated racing bikes that campaign on European race tracks and are sometimes used as training vehicles for Grand Prix motorcycle racers.

The bikes are faithful imitations of popular normal-size street motorcycles, which, for marketing reasons, are faithful imitations of pure race bikes, down to the disk brakes, handlebars, chain drives, twist-grip throttles and electronic ignition.

The little bikes weigh about 50 pounds, stand about a foot and a half high and can easily be put in the trunk of a car. They have tiny engines -- 47cc or 49cc displacement, less than 1/20th the size of a big motorcycle. And they are enticing.

"It's a fun little thing to ride," said Matt Damon, a 21-year-old salesman in a Martinez pet store. "It's a whole lot cheaper than a $6,000 or $7,000 big bike. For years now, I've been riding different types of motorcycles, but it's more like the small bikes are a fun thing, instead of just transportation. And it's easier to maintain and burns less gas."

But Damon did admit, "I took it for a ride down the street and got pulled over. The officer was kind of nice about it. But I got a ticket."

Police departments in the Bay Area and elsewhere in California have been cracking down on the little two-wheelers, saying they are a major accident waiting to happen. No police agency could come up with information about any deaths caused by pocket bike crashes, but police want them off the public roads before the inevitable happens.

"Their numbers are starting to increase," said Milpitas police Officer Jay Johnson, who was assigned by his department to look into the phenomenon and ultimately write about it for the weekly Milpitas Post. "Most of the complaints we're getting is that drivers can't see them or there'll be a group of them racing, or they're running stop signs."

For a while, though, until Johnson began studying up on the subject, and the California Highway Patrol sent out a memo clarifying just what is and what is not legal about the bikes, confusion seemed to be paramount.

In fact, it shouldn't be. On many bikes, there's a decal right there on the gas tank that says these things do not conform to "federal motor vehicle safety standards."

After a lengthy consult with the state Vehicle Code and the Department of Motor Vehicles, the CHP explained that the bikes do not meet a number of standards required for all vehicles registered in California -- the most telling example being the stipulation that "headlamp height (be) between 22 and 54 inches."

A motorcycle helmet is essentially a form of protective clothing worn on the head and can be made from several different substances including metal, kevlar, resin fiber, and other products. Helmets are used in dozens of different applications such as for protection of the head in combat, civilian life, protection from falling objects, protection from sports injuries, and from injuries due to high-speed collisions where a racing helmet would be used. Motorcycle-riders and cyclists are required to use helmets, and there are several good manufacturers on the market including icon helmets, and arai motorcycle helmets. This article caters specifically to the topic of the motorcycle helmet, and there are several different designs. The full-face helmet covers the entire head along with the rear of the helmet covering the base of the skull, and a protective section over the front of chin. There is an open cutout in a band across the eyes and nose, and you can have either a clear or tinted plastic face shield over the front, which swivels up or down to allow access to the face.

Full-face helmets including icon helmets are available from most manufacturers. They are also made from various types materials with carbon fibre kbc helmet uk being common. Most full-face helmets include vents to help with airflow and one of the best things about this type of helmet is the protection it offers for your head. Some critics dislike the increased heat, lack of air circulation, sense of isolation, and the lack of hearing that is sometimes associated with this type of motorcycle helmet. Off-road full-face helmets sometimes omit the face shield and extend the visor and chin portions. You can find a number of different visor applications including flip-face, flip-out, convertible, or modular. The chin bar pivots upwards and in some cases can be removed. With the chin bar pivoting upwards, it allows the rider to enjoy eating and drinking without unfastening the chinstrap and removing the helmet, definitely a good feature!

Another type of popular helmet is the open face. This is not commonly used as a racing helmet. The helmet's rear covers the back of the skull, but lacks the lower chin armor that the full-face helmet can provide as well as the face shield. You can purchase visors of selectable length and they come clear or tinted, which may be used by the motorcycle rider to block out sunlight or headlights. You will still get the full, rear protection of a full-face helmet but it offers little protection to the face even in non-crash events. You will also find that dust, bugs, and even wind in the face and eyes could cause you discomfort or injury. It's not uncommon for riders to wear goggles or wraparound sunglasses to supplement their eye protection with this type of helmet. Another type is the half helmet, which has the same front design as the open-face helmet, but with a raised, rear section, the half helmet provides only minimum coverage and just meets US laws. This type of helmet is definitely not recommended for motorcycle riders.

You're also going to find other types of headgear or novelty helmets, so-called because they can't legally be called a motorcycle helmet. These types of helmets are not certified and are generally only used to provide an illusion of compliance with federal mandatory helmet laws. These types of helmets are usually smaller and lighter than DOT-approved helmets, and you won't get the proper crash protection because they lack the energy-absorbing foam that protects the brain in the event of an impact. Visit user forums and various manufacturers’ web sites to gain more knowledge and information before you purchase.

So you want to be a custom bike builder? Well friend, before you rush out and buy that motorcycle kit, the one that will set you on the road to riches and fame, stop and think about the level of expertise and artistry the top builders have attained. More importantly think about how long it has taken them to attain it! Let’s look at a few key issues…

Education

You’d be surprised how well educated a lot of today’s top bike builders are. Several of them have degrees (some more than one!) ranging from mechanical engineering to business and marketing management. Billy Lane, the founder of Chopper Inc, has several patents relating to motorcycle technology in his name for example. What about someone a little more “old school” like Dave Perewitz? Dave has accumulated close to forty years of mechanical, metalworking and painting experience. Not theoretical, but genuine hands on, early morning late night kind of experience. Could you put that kind of time in? Matt Hotch is still only young, but has gained an incredible amount of practical experience customizing first bicycles, then VW’s before moving on to custom bike building.

Facilities

These guys are building choppers and custom bikes that are state of the art. They don’t get thrown together in the yard; the motorcycle shops have all the tools and equipment required to produce almost anything out of metal, not just bikes. Just as important are the other services these builders use; the local chrome platers, machinists, painters and so on. These guys have just as important a part to play in the construction of these one off bikes as the designer builders themselves.

Desire

All the top custom bike builders live for one thing; building the best bikes they can. They literally live eat even dream about custom bikes (and looking at some of the more way out creations you can totally believe this from the designs they produce!) They are constantly striving to build bikes better. Its not about money for the top guys, I am convinced of that.

So where does that leave Average Joes like you and me? Actually, I don’t think we are too badly off; in fact if you want to build a custom bike, it has probably never been easier. Here’s my take on it….

Education

There is an unbelievable amount of information for the guys who want to start down the road to custom bike building. Videos, books websites, all of them help to flatten the learning curve for a novice. Most of the material out there relates to motorcycle kits, and for the beginner, building a motorcycle kit is definitely the best way to go if you want to get real hands on experience. After that there are motorcycle maintenance courses, which again will allow you to get up to speed as fast as possible in your quest to become the next Arlen Ness!

Facilities

To put together a shop like the ones you see on television costs thousands of dollars. But you don’t need all that stuff if you start with a motorcycle kit. Motorcycle kits can be put together with some pretty basic tools, providing they are of good quality. Two things that are an absolute must in my opinion though are a torque wrench and a basic lift. With these two tools, you can tighten the motorcycle kits fittings correctly, and not break your back while you are doing it!

Desire

Well this is one area where you can match the pros, no question. If you really want to be a custom bike builder, start doing it for fun and put your motorcycle kit together.